Pulse counter
DB2-PUL-2NTC
![]() |
Key features
|
The DB2-PUL-2NTC is a battery powered ZigBee device, capable to count pulses emitted from fl ow rate meters (water, gas, electricity,...) and to measure the temperature from both the 2 on board NTC inputs. Pulse counters and temperature samples are sent at regular intervals to a gateway of Digitron products family.
Moreover, if temperature sensors are installed into an hydraulic circuit in the inlet and outlet pipes this device can General characteristicssend the difference between them.
Technical Specs
|
|
General characteristics
|
Chip Ember EM250
Compatible IEEE 802.15.4 Stack EmberZnet 3.5.x (ZigBee PRO) Modbus/RTU Device address settable via internal dip-switch Wall mounting with screws Cable gland: PG9 |
RF characteristics
|
Frequency: 2405 MHz ÷ 2480 MHz
Modulation: DSSS Nominal transmission power: 2mW (3 dBm) Reception sensitivity: -95 dBm Internal antenna gain: 0 dB Coverage outdoor/indoor: 100m/30m |
Supply
|
AA high energy density lithium battery 3,6V/2000mAh
Battery life: 2 years in case of 1 transmission per minute at 20°C |
NTC thermal resistor input
|
NTC type resistor
103AT type (R25 = 10 KOhm; Beta = 3435K) Measurement range: -50°C ÷ +110°C Measurement resolution: 0,1°C Measurement accuracy : ±1,0°C Measures are linearized at tenth of degree |
Digital inputs
|
Electronic type not insulated inputs for clean contact
Short circuit current 0,01mA. Use self-cleaning contact |
Connections
|
Pull out terminals (3,81 mm pitch)
|
Environment parameters
|
Operating temperature: -10 ÷ +60°C; <80% U.R. not condensing
Storage temperature: -20 ÷ +70°C; <80% U.R. not condensing Degree of protection: IP 55 |
Compliant with 2006/95/EEC,
89/336/EEC, 99/5/EEC directives
Reference Norms
|
ETSI EN 300 328: Radio Compatibility for digitals wide band transmissions
ETSI EN 301 489: Radio Compatibility EN 61000-6-2: Electromagnetic Compatibility - Emissions EN 61000-6-3: Electromagnetic Compatibility - Immunity EN 60950-1: Electric Safety |